Spec

• Temperature adjustment range: cooling water temperature + 5 ~ 60 degrees C
• Temperature control accuracy: +/- 0.2 degrees C (with external cooling system)
• Speed range: 80 ~ 1000 rpm
• Time setting/Accumulating timer: 0 ~ 99 hours, 59 minutes, 1 ~ 9999 hours
• Temperature control system: Heater heating at bottom of tank, cooling water circulation in pipe
• Rotational transmission system: Magnet drive non-sealed type
• Ventilation system: ring sparger type
• Safety features: Self-diagnostic (Heater break, sensor error, SSR failure, motor error, memory error, upper and lower temperature limit, alarm), f***, fixed temperature overheat protection
• Timer function: Auto start, Auto stop
• program function: step program
• Temperature sensor: Platinum temperature resistor Pt 100 ohm
• Heater: 190 W
• Stirring motor/blade: 40 W output, turbine blade
• Service outlet: 2 units Max. 10 A
• Size of culture tank: inner diameter 114 x 160 mm
• Culture tank capacity: 1.5 L
• Culture Tank Material: Hard Glass, SUS 316, SUS 304
• External dimensions: 197 x 284 x 595 mm
• Weight: approximately 13 kg
• Power input/voltage: 3 A, 300 VA/AC 100 V 50/60 Hz
• *Performance is measured at room temperature of 20 degrees Celsius, rated supply voltage, 50 Hz and no load.
• *Attached tubes: Internal diameter 4 x External diameter 8.4 (1.8 m), Internal diameter 5 x External diameter 9.4 (1 m), Internal diameter 7 x External diameter 10 (1 m)
• Code: 249000