Spec

• Setting range: 0 ~ 400 degrees Celsius
• Minimum display unit: 1 deg.
• Setting accuracy: +/- 0.5%
• Alarm setting range: 0 ~ 400 degrees C
• Alarm description: When the alarm is raised above the set temperature, turn the alarm lamp on and turn off the internal relay (reset is performed by the power switch).
• Power supply: 100 VAC 50/60 Hz (shared with main unit and load)
• Connection capacity: AC 100 VmAX 15 A resistance load (shared with main unit power supply)
• External dimensions: 130 x 145 x 85 mm (excluding protrusions)
• Sensor cord length: 2.0 m (K thermocouple)
• Power cord length: 2 m (3P plug)
• Sensor specifications: Silica glass coating (400 degrees C heat resistant)
• Calibration points are 25 degrees Celsius and 2 points of 80 degrees Celsius. If you would like additional points, please contact us separately.