Spec

• Composite Scale: 1.5 ~ 7.0 ml x 6
• Maximum working pressure: 5 MPa (at 230 degrees C)
• Container dimensions (mm): diameter 75 (cylindrical part)
• Operating temperature range: Room temperature to 230 degrees Celsius (excluding when using septum)
• Stirring system: Magnetic stirrer (RCH -1000 type)
• Features:
• Reflux: Cold finger (return with tap or cooling water)
• Gas replacement: Ball valve (3-way type for switching) + pressure gauge
• Pressure indication and relief valve: Filling of reactant gas after purging - 100/0/2400 kPa, Relief adjustment range: 0.34 ~ 2.41 MPa
• Standard:
• Others: With temperature sensor insertion hole, positioning hole
• Container dimensions (mm): height 110 (without protrusions), body cylinder: phi 75 x 44 H
• Vial: 10 mL vial
• Dimensions (mm): phi 20 x 70 H with TS 14/23
• Stirrer dimensions (mm): phi 5 x 15
• Connection Diameter: Cold Water Connection Port/Purge Port: Outer Diameter 7.62 mm Hose Port, Reactive Gas Inlet: Outer Diameter 1.58 mm (1/16 ") Hose made of SUS 316
• Wetted part materials: SUS 316 (Body, Cover), Viton (O-ring), EPDM (relief valve seal), Glass (vial)
• *Use a single-holder BBS -1 HLD to heat the container.
• *The O-ring made by Perfro ® needs to be replaced for temperatures above 200 degrees Celsius.
• *The EPDM O-ring must be replaced when circulating cooling water below 0 degrees Celsius.
• *Vials and stirrers are sold separately.
• *Dep***ing on the sample and conditions of ***, this may fall under the Ministry of Economy, Trade and Industry's High Pressure Gas Safety Act.
• *Reflux at low temperatures requires a cooling water circulator.
• *Conversion of the pressure gauge and spring kit is required to operate at 5 MPa.
• Code: 248370