Spec

• Housing: Polypropylene
• Membrane Material: Polytetrafluoroethylene
• vents: inlet side
• Support System: Polypropylene
• Connection Method: Heat Crimping
• Voltage: 0.41 MPa (60psi)
• Filtration direction: with bidirectional support. Only one direction dep***ing on the application due to venting. Reverse filtration is possible only at low pressure.
• Sterilization: Unsterilized/Autoclavable at 121°C for 20 minutes (maximum temperature 132°C). It is possible to autoclave repeatedly, but *** at the ***r's responsibility to avoid cross contamination. Perform the integrity test after autoclaving. Sterilization with ethylene oxide gas is possible.
• Effective Filtration Area: 1,000 cm2
• IPA Bubble Point: > 0.09 MPa (13psi)
• Pore Diameter (μm): 0.2
• Connection Inlet: 3/8 "FNPT
• Connection Outlet: 3/8 "FNPT
• FNPT= Female Thread NPT