Features

• Holder for fixing cube beam splitter.
• Since the prism press supports are eliminated and the lower side of the cube is sandwiched with thin claws, the effective diameter can be ***d in all four directions.
• Can be attached to a rod or post stand.
• It can also be attached directly to the base or stage with M4 screws.
• Can be attached to a rod or post stand.
• It can also be attached directly to the base or stage with M4 screws.
• * If you tighten the screws tightly, the glass may break.
• * Tighten the cube with the minimum force that prevents it from moving.
• * For prisms with an external tolerance of ±0.2 mm.
• * If the external tolerance is large, it may not be installed.