Spec

• Filtration area, m
  
  ²
  
  : 2.4
• Diameter, cm (inch): 7.1 (2.8)
• Length, Inch (cm): 30 (75)
• Support material: Polyester
• Seal material: Silicone
• Device material: Polypropylene
• Material: Cellulose mixed ester
• Code: Code 0
• Format: Single Layer
• Brand name: Milligard
• Package: Double easy open bag
• Form: Cartridge
• Quantity/box: 3
• Overview: Milligard cartridge filter 30in. code 0 0.2μm
• Product name: Milligard cartridge filter
• Cartridge code: Code 0 (2-222) O-ring
• Nominal bore diameter, μm: 0.2
• Maximum input pressure, kPa (psi): 3.5 (50) @ 25
  
  
  °C
• Maximum differential pressure, kPa (psid): 345 (50) @ 25
  
  
  °C
• Sterilization: Autoclave sterilization or SIP sterilization of 121° for 30 minutes 10 times
• Total extract: The extractables level was equal to or less than 50
  
  
  mg per 10-inch cartridge after 24
  
  
  hours in water at controlled room temperature.
• ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.